. It has a USB Type-C port on one end and a USB 3.0 port on the other. That makes it a bit of a dual-sport USB hub.
It’s a USB 2.0 hub but it’s using an older USB 3.0 version for the two USB 3.0 ports. That’s not a major issue but it’s something to consider if you are buying a new hub.
This device is a budget USB hub. If you’re just looking to use it to transfer files, then it’s fine. But if you are looking for a USB 3.0 hub, then you’ll need to spend more on a high-end hub.
It would be nice if there were more USB hubs on the market. If this is something you’re concerned about, then you might want to check out more expensive options such as our picks for the best usb hubs.
What to look for when buying a new USB hub
If you’re looking for a new USB hub, the number one thing to consider is power consumption. USB hubs are the most energy-efficient devices out there. USB 2.0 hubs use as little power as possible.
However, USB 3.0 USB hubs can reach peak output levels of more than 2.3A, and newer devices on the market can use as much as 5A. This is why it’s a good idea to buy a USB hub that can accommodate the maximum output of your USB devices.
There are two types of power sources to consider with a USB hub.
USB Type-C
This is one of the most common ports on USB hubs. However, they tend to be a bit more expensive and a bit less efficient than USB 3.0. USB 3.0 is faster as it will only use the data that is directly transmitted over the USB bus.
The disadvantage, however, is that the data will be slower than USB 2.0. The slower transfer rate means that the device will slow down as it attempts to transfer large volumes of data.
USB 2.0
The second power source that USB 2.0 uses is power output as USB 2.0 devices use USB 2.0 as well. A USB 2.0 hub uses the same power output as a USB 1.1 hub.
A USB 2.0 hub uses more power than a USB 1.1 hub because it uses two power sources. The one powered by your computer uses the USB bus, and the other uses electricity from the power outlet.
USB Type-C
This is one of the most common ports on USB hubs. However, they tend to be a bit more expensive and a bit less efficient than USB 3.0. USB 3.0 is faster as it will only use the data that is directly transmitted over the USB bus.
The disadvantage, however, is that the data will be slower than USB 2.0. The slower transfer rate means that the device will slow down as it attempts to transfer large volumes of data.
USB Type-A
This is the other power source that USB Type-A uses. However, there’s a problem with Type-A hubs. In order to use Type-A to transfer data, you must first use Type-C to transfer it. Type-C hubs simply don’t have the power needed to do that.
USB Type-C can be a useful option for a number of reasons. First, Type-C docks use USB Type-A power output. This means that Type-C can be connected to your